Safety Devices Of The Product - Frank bSteam bS108 VAC Betriebsanleitung

4. Safety devices of the product

Two thermostats: a ceramic thermostat for "manual recovery" frontal to the
boiler, a capillary thermostat with sensor ball inserted in the tube between the
resistors. It intervenes in case of anomaly or excessive temperature.
Safety valve, (allows the excess steam to escape in case of abnormal condition
of the machine under pressure). If it starts to work, turn off the machine and
take it to a maintenance center for inspection.
Low voltage in the handle (safety voltage for connection to the inside of the
hose).
Symbols used:
Symbol Note
GENERAL DANGER:
When this symbol appears, it indicates that you should
pay close attention to the functions or instructions
described.
MAINTENANCE:
Operation and maintenance details
STEAM:
Caution hot steam jet
HOT SURFACES:
Caution: Risk of burns
STILL:
Rules that must be followed at the end of the product's
life.
DO NOT DIRECT THE BEAM
under pressure to persons, animals, electrical
appliances and also not to the machine itself.
3