Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Remove the
disk-drive
7. Remove the
Optional I/O
8. Remove the
expansion
9. Remove the
memory
modules.
10. Remove the
solid-state
11. Remove the
WLAN
card.
12. Remove the
heat-sink and fan
13. Remove the processor.
About this task
The following image indicates the connectors on your system board.
1. Intrusion-switch cable
3. Processor-fan cable
5. Power-button cable
7. M.2 2230/2280 solid-state drive slot
9. Hard-drive data cable (SATA 0)
11. SATA power cable
13. PCIe x16 slot (SLOT 2)
15. Coin-cell battery socket
17. Video cable
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
cage.
modules.
card.
drive.
assembly.
Entfernen und Installieren von vor Ort austauschbaren Einheiten (FRUs)
2. Processor-power cable
4. UDIMM slots
From the left (a>b):
DIMM 1
DIMM 2
6. System-power cable
8. M.2 WLAN slot
10. Optical-drive/hard-drive data cable (SATA 1)
12. Internal-speaker cable
14. PCIe x1 slot (SLOT 1)
16. Processor socket
18. I/O cable
95
Werbung
Inhaltsverzeichnis
