Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Remove the antenna cables from routing guides on the system board.
4. Remove the external SMA antenna kit off the system board.
Installing the SMA antenna kit
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the external SMA antenna kit and provides a visual representation of the
installation procedure.
Steps
1.
NOTE:
Steps 1, 2, and 3 are required when installing the external SMA antenna kit for the first time.
86
Entfernen und Installieren von vor Ort austauschbaren Einheiten (FRUs)
Werbung
Inhaltsverzeichnis
