Dell OptiPlex Small Form Factor 7010 Bedienungsanleitung Seite 105

Table 26. System setup options—System information menu (continued)
General-System Information
Current Clock Speed
Minimum Clock Speed
Maximum Clock Speed
Processor L2 Cache
Processor L3 Cache
Microcode Version
Intel Hyper-Threading Capable
64-Bit Technology
Device Information
Slot 1
Slot 2
LOM MAC Address
Video Controller
Video Memory
Native Resolution
Video BIOS version
Audio Controller
Wi-Fi Device
Bluetooth Device
dGPU Video Controller
Table 27. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Sequence
Boot List Option
Force PXE on Next Boot
Secure Digital (SD) Card Boot
Secure Boot
Enable Secure Boot
Enable Microsoft UEFI CA
Secure Boot Mode
Expert Key Management
Enable Custom Mode
Custom Mode Key Management
Table 28. System setup options—Integrated devices
Integrated Devices
Date/Time
Memory Mapped I/O above 4 Gig
Displays the current processor clock speed.
Displays the minimum processor clock speed.
Displays the maximum processor clock speed.
Displays the Processor L2 Cache size.
Displays the Processor L2 Cache size.
Displays whether the microcode version.
Displays whether the computer is Intel Hyper-Threading capable.
Displays whether 64-bit technology is used.
Displays the slot 1 information of the computer.
Displays the slot 2 information of the computer.
Displays the LOM MAC address of the computer.
Displays the video controller type of the computer.
Displays the video memory of the computer.
Displays the native resolution of the computer.
Displays the video BIOS version of the computer.
Displays the audio controller information of the computer.
Displays the wireless device information of the computer.
Displays the Bluetooth device information of the computer.
Displays the dGPU video controller of the computer.
Displays the boot sequence.
Displays the available boot options.
This option is disabled by default.
This option is disabled by default.
This option is disabled by default.
This option is enabled by default.
The option Deployed mode is enabled by default.
This option is disabled by default.
The option PK is enabled by default.
Displays the date and time configuration of the computer.
This option is enabled by default.
BIOS-Setup 105