Dell OptiPlex Small Form Factor 7010 Bedienungsanleitung Seite 110

Table 39. System setup options—Virtualization menu (continued)
Virtualization
Intel Trusted Execution Technology
(TXT)
Enable Intel Trusted Execution
Technology (TXT)
DMA Protection
Enable Pre-Boot DMA Support
Enable OS Kernel DMA Support
Table 40. System setup options—Performance menu
Performance
Multi Core Support
Active Cores
Intel SpeedStep
Enable Intel SpeedStep Technology
C-States Control
Enable C-State Control
Intel Turbo Boost Technology
Enable Intel Turbo Boost Technology
Intel Hyper-Threading Technology
Enable Intel Hyper-Threading Technology
PCIe Resizable Base Address Register
(BAR)
Table 41. System setup options—System Logs menu
System Logs
BIOS Event Log
Clear BIOS Event Log
110 BIOS-Setup
By default, the option is enabled.
Specifies whether a measured Virtual Machine Monitor (MVMM) can utilize the
additional hardware capabilities that are provided by Intel Trusted Execution
Technology.
By default, the option is disabled.
The option is enabled by default.
The option is enabled by default.
Enables to change the number of CPU cores available to the operating system.
By default, the All Cores options are enabled.
Enables the computer to dynamically adjust processor voltage and core
frequency, decreasing average power consumption and heat production.
By default, the option is enabled.
Enable or disable additional processor sleep states.
By default, the option is enabled.
Enable or disable Intel TurboBoost mode of the processor.
By default, the option is enabled.
Enable or disable Hyper-Threading in the processor.
By default, the option is enabled.
This option is disabled by default.
Display BIOS events.
By default, the Keep option is enabled.