Dell OptiPlex Small Form Factor 7010 Bedienungsanleitung Seite 52

4. Remove the 2.5-inch hard drive
5. Remove the 3.5-inch hard drive
6. Remove the disk-drive
About this task
The following image indicates the location of the optical-drive assembly and provides a visual representation of the removal
procedure.
Steps
1. Remove the single (M2x2) screw to release the optical drive from the disk-drive cage.
2. Slide the optical drive out of the disk-drive cage.
52 Entfernen und Installieren von vom Kunden austauschbaren Einheiten (CRUs)
if applicable.
if applicable.
cage.