Sma-Antenne; Removing The External Sma Antenna Kit - Dell OptiPlex Small Form Factor 7010 Bedienungsanleitung

5. Install the front bezel.
6. Install the side cover.
7. Follow the procedure in

SMA-Antenne

Removing the external SMA antenna kit

CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch hard drive
5. Remove the 3.5-inch hard drive
6. Remove the disk-drive
About this task
The following image indicates the location of the external SMA antenna kit and provides a visual representation of the removal
procedure.
Steps
1. Remove the nut and washer from the two antenna heads.
2. Gently pry and remove the antenna heads from the chassis.
After working inside your
Before working inside your
if applicable.
if applicable.
cage.
Entfernen und Installieren von vor Ort austauschbaren Einheiten (FRUs)
computer.
computer.
85