LANCOM GS-2352 Installationshandbuch Seite 22

Installation Guide LANCOM GS-2326/GS-2326P/GS-2352/GS-2352P
Chapter 5: Configuring and monitoring the LANCOM switch
5.2.1 Ethernet port status
LANmonitor displays the current status of all of the device's Ethernet ports.
This includes monitoring of the state as configured by the admin (config state)
and the actual state (link state) of the port. Each port is displayed with two
colored symbols in LANmonitor:
The left icon shows the config state:
The right-hand icon shows the link state:
Apart from the status, LANmonitor displays the VLAN ID for each port and the
detected data rate at active ports connected to active network devices.
22
Gray: The port is deactivated in the configuration
Yellow: The port is activated in the configuration
Gray: No active network device is connected to the port
Green: A network device is connected to the port and active