LANCOM GS-2352 Installationshandbuch Seite 15

LANCOM GS-2326(P)
rear
2.2 SFP Transceiver Slots
Depending on the model the switch offers different numbers of Small Form
Factor Pluggable (SFP) Transceiver Slots:
I
2.3 LEDs
The switch includes a display panel for system and port indications that sim-
plify installation and network troubleshooting. Use the mode button
(LANCOM GS-2352(P) only) to select the Speed or Link/Act or PoE (only GS-
2352P) LED function. The LANCOM GS-2326(P) provides seperate port LEDs
for Speed (left) or Link/Act (right). Details are shown below and described in
the following table:
LED
TP Link/Act
TP Speed
SFP Link/Act
SFP Speed
System/Power
PoE
Installation Guide LANCOM GS-2326/GS-2326P/GS-2352/GS-2352P
A LANCOM GS-2326(P) offers 2 SFP slots
A LANCOM GS-2352(P) offers 4 SFP+ slots
Please find a list of supported SFP transceivers in your devices data-
sheet.
Condition
Green permanent
Green blinking
Green permanent
Orange permanent
Green permanent
Green blinking
Green permanent
Green permanent
Green permanent
Off
Chapter 2: Hardware
Power Connector
Description
TP Link up
Data traffic
TP Link with 1000 MBps
TP Link with 100 MBps
SFP Link up
Data traffic
Link with 1000 MBps
Power up
PoE active
Device switched off
15