High-performance business-vpn-router mit integriertem vdsl- /
adsl2+-modem sowie wlan mit bis zu 300 mbit/s für die sichere vernetzung
von standorten (10 Seiten)
Seite 1
LANCOM GS-2352 LANCOM GS-2352P LANCOM GS-2326 LANCOM GS-2326P...
Seite 2
Zusicherung von Produkteigenschaften. LANCOM Sys- duct characteristics. LANCOM Systems shall be liable only to tems haftet ausschließlich in dem Umfang, der in den Ver- the degree specified in the terms of sale and delivery.
CLI (Command Line Interface) über SSH oder Telnet. Zusätzlich enthält der Switch einen eingebauten Netzwerk-Management-Agenten, welcher die Verwaltung über SNMP oder RMON (Gruppe 1, 2, 3, 9) erlaubt. Für das Outband-Management bieten der GS-2326 und GS-2326P einen RJ45-Konsolen-Port an der Frontseite an, der GS-2352 und GS-2352P einen...
Je nach Modell bietet der Switch eine unterschiedliche Anzahl von 1000BASE- T RJ-45 Ports Ein LANCOM GS-2326(P) verfügt über 24 1000BASE-T-Ports Ein LANCOM GS-2352(P) verfügt über 48 1000BASE-T-Ports Alle RJ-45 Ports unterstützen den automatischen MDI/MDI-X-Betrieb, auto- matische Aushandlung der Übertragungsgeschwindigkeit und der Fluss-Kon- trolle nach IEEE 802.3x.
Seite 5
Verwenden Sie den Mode-Taster (nur LANCOM GS-2352(P)), um die Anzeige zwischen Speed oder Link/Act oder PoE (nur GS-2352P) umzu- schalten. Der LANCOM GS-2326(P) verfügt über separate LEDs an den jewei- ligen Ports für Speed (links) oder Link/Act (rechts). Die folgende Tabelle zeigt...
Installation Guide LANCOM GS-2326/GS-2326P/GS-2352/GS-2352P Kapitel 3: Netzwerkplanung Stromversorgung Auf der Rückseite des Gerätes finden Sie die Buchse für die Stromversorgung über ein Kaltgerätekabel. 3 Netzwerkplanung Einführung in das Switching Ein Switch ermöglicht das zeitgleiche Übertragen von zahlreichen Datenpake- ten, er kann daher Netzwerke effektiver als andere Geräte in einzelne Bereiche aufteilen.
Installation Guide LANCOM GS-2326/GS-2326P/GS-2352/GS-2352P Kapitel 4: Installation Kopplung von mehreren entfernten Standorten in Enterprise- oder Small- Business-Strukturen Peer-to-Peer-Anwendungen zur Kopplung zweier entfernter Büros Office-Netzwerke 4 Installation Aufstellungsort Der Switch kann in einem üblichen 19"-Rack montiert oder auf einer ebenen Fläche aufgestellt werden. Stellen sie die folgenden Voraussetzungen für den Aufstellungsort sicher: In der Nähe der anzuschließenden Geräte und in der Nähe einer Strom-...
Lieferumfang und benötigtes Zubehör Bitte prüfen Sie den Inhalt der Verpackung auf Vollständigkeit, bevor Sie mit der Installation beginnen. Neben dem LANCOM Switch sollte der Karton fol- gendes Zubehör für Sie bereithalten: Netzkabel zum Anschluss an die Stromversorgung 19’’-Montagewinkel (2 Stück) und Befestigungsmaterial Serielles Kabel (abhängig vom Modell)
Achten Sie auf eine ausreichende Belüftung des Gerätes, um Schäden durch übermäßige Wärmeentwicklung zu vermeiden. LAN-Anschluss – schließen Sie die Netzwerkgeräte über ein geeignetes Twisted-Pair-Kabel (TP-Kabel) an die Ports des LANCOM Switches an. Die Anschlüsse erkennen die mögliche Überrtagungsgeschwindigkeit und die Pin-Belegung automatisch (Autosensing).
Hyperterminal o.ä. sowohl über eine Netzwerkverbindung als auch über eine Direktverbindung über die serielle Konfigurationsschnittstelle (RS- 232) nutzen. Unter Windows können Sie die LANtools nutzen, um die LANCOM Switches zu suchen und überwachen: LANconfig ist das Windows-Konfigurationsprogramm für alle LANCOM- Geräte.
Command Line Interface über Netzwerk starten Wenn Ihnen die IP-Adresse des Gerätes bekannt ist (siehe auch vorhergehen- der Abschnitt) und der LANCOM Switch von Ihrem Rechner aus über das Netz- werk erreichbar ist, können Sie das Command Line Interface über das Netzwerk nutzen.
Installation Guide LANCOM GS-2326/GS-2326P/GS-2352/GS-2352P Kapitel 5: LANCOM Switch konfigurieren und überwachen Baudrate: 115200 Stop Bits: 1 Data Bits: 8 Parity: N Fluss-Kontrolle: keine Melden Sie sich mit Benutzername und Kennwort an (Default: admin, Kennwort: admin). LANCOM Switch mit LANmonitor überwachen Der Zustand des Gerätes und der einzelnen Ports kann über die LEDs an der...
SNMP or RMON (Groups 1, 2, 3, 9) protocols. For out-band management the GS-2326 and GS-2326P offer a RJ45 console port connector on the front panel, the GS-2352 and GS-2352P a serial port on the back. For a detailed description of the management features, refer to the...
Seite 14
Depending on the model the switch offers different numbers of 1000BASE-T RJ-45 ports: A LANCOM GS-2326(P) offers 24 1000BASE-T ports A LANCOM GS-2352(P) offers 48 1000BASE-T ports All RJ-45 ports support automatic MDI/MDI-X operation, auto-negotiation and IEEE 802.3x auto-negotiation of flow control, so the optimum data rate and transmission can be selected automatically.
Seite 15
The switch includes a display panel for system and port indications that sim- plify installation and network troubleshooting. Use the mode button (LANCOM GS-2352(P) only) to select the Speed or Link/Act or PoE (only GS- 2352P) LED function. The LANCOM GS-2326(P) provides seperate port LEDs for Speed (left) or Link/Act (right).
Installation Guide LANCOM GS-2326/GS-2326P/GS-2352/GS-2352P Chapter 3: Network planning Power supply There are a power sockets on the rear panel of the switch. 3 Network planning Introduction to switching A network switch allows simultaneous transmission of multiple packets, it can partition a network more efficiently than bridges or routers. Therefore the switch has been recognized as one of the most important device for today’s...
Installation Guide LANCOM GS-2326/GS-2326P/GS-2352/GS-2352P Chapter 4: Installation 4 Installation Selecting a site The Switch can be mounted in a standard 19-inch equipment rack (via Opti- onal Rack mount Kit) or on a flat surface. Be sure to follow the guidelines below when choosing a location.
Seite 18
Chapter 4: Installation Package content and accessories Before beginning with the installation, please check that nothing is missing from your package. Along with the LANCOM Switch the box should contain the following accessories: Power cord 19’’ adapter (2 pieces) and mounting materials...
Supply power and switch on – Supply power to the device by means of the IEC power cable. Ready for operation? – After a brief self-test, the power LED (LANCOM GS-2326 / LANCOM GS-2326P) or system LED (LANCOM GS-2352 / LAN- COM GS-2352P) lights up continuously.
Seite 20
"admin", password "admin". If you do not have the device's IP number, LANconfig can be used to search for it. To start LANconfig click on Start / Programs / LANCOM / LAN- config. LANconfig automatically searches for all available devices in your network.
Seite 21
5.1.2 Starting the Command Line Interface over the network If you know the device's IP address (see section above) and the LANCOM switch is accessible from your computer via the network, the you can use the command line interface via the network.
Seite 22
Installation Guide LANCOM GS-2326/GS-2326P/GS-2352/GS-2352P Chapter 5: Configuring and monitoring the LANCOM switch 5.2.1 Ethernet port status LANmonitor displays the current status of all of the device's Ethernet ports. This includes monitoring of the state as configured by the admin (config state) and the actual state (link state) of the port.