Dishwasher Detergent - Wolkenstein WGSP14-6DFI Bedienungsanleitung

5. The indicator of the rinse aid «
6. The appliance is now in rinse aid setting-mode.
7. The display indicates the current status of the rinse aid consumption: e. g.
consumption level « D 4 ».
S
TEP
1. Press the « P
ROGRAMME
setting (D 1 - D 5) according to your usage habits.
3. Each press of the « P
one level. The settings are consecutive: D 1 → D 2 → D 3 → D 4 → D 5 → D 1
 Press the « O
N
exit the setting mode. After 5 seconds without using any operating buttons, the
set rinse aid consumption level will also be activated.

4.3 Dishwasher detergent

D
ISHWASHER DETERGENTS ARE DIVIDED INTO
 conventional, alkaline detergents with caustic components.
 low-alkaline concentrated detergents with natural enzymes.
"Normal" programmes combined with concentrated detergents prevent pollution
and are also good for your dishes. Such programmes support the cleaning effect of
the enzymes. Therefore, "normal" programmes combined with concentrated
detergents are as effective as "intensive" programmes.
T
HERE ARE
1. with phosphate and chlorine.
2. with phosphate / without chlorine
3. without phosphate / without chlorine
Most recent powdered dishwasher detergents usually do not contain any phosphate,
so they do not soften the water. In such a case add a water softener (= dishwasher
salt) even if the hardness of water is e.g., 6°dH. Otherwise, white spots may occur
on your dishes and glasses.
2:
SETTING OF THE RINSE AID CONSUMPTION
» -
BUTTON
» -
ROGRAMME
S 3:
TEP EXIT RINSE AID SETTING MODE
/ O » -
FF BUTTON
CHEMICAL COMPOSITION
3
KINDS OF DISHWASHER DETERGENTS
» flashes.
repeatedly to select the desired consumption
changes the consumption setting by
BUTTON
to save the rinse aid consumption setting and
2
~ ~
121
GROUPS DUE TO THEIR
:
:
.