AEG FT 4925 Bedienungsanleitung Seite 78

English
78
Changing the Measurement Scale
The infrared thermometer can display temperature measurements in either
°C or °F.
The operation how to change the measurement scale between °C and °F
as: After all icons displaying and when the picture "--°C" or "°F--" display-
ing, please press the scan button, turn the °C or °F to °F or °C. Wait for 3
seconds and the thermometer will automatically enter the measurement
mode.
Note:
Your thermometer provides both Fahrenheit and Celsius readings in
countries where the Fahrenheit units are adopted, otherwise it provides
only the Celsius unit. It isn't a bad one if your product can't change °C
to °F.
Taking Temperature in Ear Temperature Mode
1) When the system is in the state of time/environmental tem-
perature display, press the button of scan, and the last tempera-
ture measurement will be displayed; then after "Beep-Beep",
the system enters into the mode of measurement.
2) Remove the probe cap, and the thermometer enters into
the ear measuring mode (Refer to the Picture 7.1).
3) Carefully pull back the ear to stretch the auditory canal.
When measuring ear temperature, insert the probe into
the ear first (refer to the Picture 7.2), then press the but-
ton of scan. One second later you will hear "Beep",and
you can remove the thermometer. The measurement is
completed.
(Picture 7.1)
(Picture 7.2)
(Picture 7.3)