Pneumatic Connections - Michelin MBV50 Bedienungs- Und Wartungshandbuch

Elecktrokompressoren mit geshmiertem kolben

Vorschau ausblenden

Seite von 60

/ 60
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

b) Make sure there is adequate ventilation at the place of work.

c) Protect your nose and mouth with an appropriate mask.

If the electrical cable or plug are damaged, do not use the

compressor and contact an authorised service centre to replace

the faulty component with an original spare part.

If the compressor is located on a shelf above floor height, it must

be secured to prevent it falling while in operation.

Do not put objects or your hands inside the protective grilles to

avoid injury to yourself or damage to the compressor. (Do not use

the compressor as a blunt object toward objects or animals, to

avoid serious damage).

When you have finished using the compressor, always remove the

plug from the power socket.

MCX24 – MB24 - MB24S – MX24 –MB30 - MCX50 - MB50 – MB50S

- MX50 - MCV172 – MVX50 - MB10 - MB15:

Maximum operating pressure 8.5 bar

Minimum operating pressure 8 bar

Intake pressure: atmospheric pressure

MBV50 - MCX50B - MCX100 – MCX200 – MCX360 – MCX510 –

MCX550 – MCX670 – MCX800 – MCX850 – MCX1100 – MCX1350 –

MCX1700 – MCX1960 – VCX50 - VCX 100/3 MC – VCX150 - MB100:

Maximum operating pressure 10.5 bar

Minimum operating pressure 10 bar

Intake pressure: atmospheric pressure

This equipment has been designed to compress AIR, no other

substances are allowed.

Acoustic pressure measured free-field at a distance of 4 m ±3 dB(A) at

maximum operating pressure.

MCX24 – MB24 - MB24S – MX24 –MB30

MCX50 - MB50 – MB50S - MX50 –

MBV50 - MCV172 – MVX50 - MB10-

MB15

MCX50B - MCX100 – MCX200 – MCX360

MCX510 – MCX550 – MCX670 – MCX800

MCX850 –VCX50 - VCX 100/3 MC –

VCX150 - MB100

MCX1100 – MCX1350 – MCX1700

MCX1960

The level of acoustic pressure can increase from 1 to 10 dB(A)

according to the place in which the compressor is installed.

WARNING:

For efficient operation of the machine at full continuing load and at

maximum operating pressure, make sure the temperature of the

work environment indoors does not exceed 25°C.

We advise you to use the compressor at 70% maximum duty per

hour at full load as this ensures efficient operation of the product

long-term.

STORING THE PACKED AND UNPACKED COMPRESSOR

For the whole time that the compressor is not used before unpacking

for the first time, store in a dry place at a temperature between 5°C

and 45°C and sheltered position to protect it from the weather. For the

whole time that the compressor is not used after unpacking, while

waiting to start it up or due to production stoppages, place sheets over

it to protect from dust, which may settle on the components. The oil is

to be replaced and the operational efficiency of the compressor is to be

checked if it is not used for long periods.