SHE control panel TRZ Plus Comfort
Connection diagram
All work to be carried out without mains supply (230 V AC) or any batteries connected. Route the connecting cables into
the control panel housing at the top. Connect all connecting cables according to the wiring diagram and make sure that
they are correctly connected. Incorrect connections or figure or colour mix-ups can lead to incorrect function of the
control panel or of the external components.
The notes and installation directives in the technical documentation on pages 36 to 43 are always to be observed.
Mains
Drives
supply
Junction box
last drive
brown
blue
1. drive
brown
blue
Service Port
Certain functions can be provided with further parameters via the service port (PC interface) using the appropriate
PC configuration software* and connecting cables*. The functions depend on the PC software version and the firmware
of the SHE panel control system. The service timer can only be Reset via the software.
Please contact service@essmann.de.
* not included in delivery.
44
Smoke
SHE manual call point
detector
Vent switch
Wind-rain detector
potential free contacts
Buzzer / signal lamp
Buzzer
02/24999539