Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Original Instruction Manual
OPERATION
Before use
Before using the cutter, familiarize yourself with all the operating features and
safety requirements.
WARNING: For your own safety and protection. Don't attempt to operate
the machine until it is completely assembled and all components and
accessories are properly installed according to this instruction manual. Read
and understand the capacity of the machine.
The machine must be set up so that it stands firmly. We strong suggest
securely screwed it to a work bench or similar.
All covers and safety devices must be correctly attached before the machine
is used for the first time.
The cutting wheel must rotate smoothly.
Filling the water tray
Water is used to cool and lubricate the blade when cutting tile. Water also
reduces the amount of tile dust produced. Fill the water tray with water before
making any tile cuts. The water level should be above the blade cover base
when the water tray is under the saw as shown in Figure 1
Figure 1
Cutting
To make a rip cut:
1. Mark the cut line on a tile.
2. Loosen the lock knob (Figure 2) and slide the parallel fence to the edge of
the table.
11
Werbung
Inhaltsverzeichnis
