LG -A110 Benutzerhandbuch Seite 61

❑ Troubleshooting
Problem
You have entered a number but it
was not dialed
Your correspondent cannot
reach you
Your correspondent cannot hear
you speaking
The voice quality of the call is poor Check the signal strength indicator on the display.
28
Possible Solution
Be sure that you have pressed Talk/ Yes key.
Be sure that you have accessed the right network
service.
Be sure that you have not set an outgoing call
barring option.
Be sure that you have entered the area code.
Be sure that your phone is switched on. Press Talk/
Yes key for more than one second. Be sure that you
are accessing the network service. Be sure that you
have not set an incoming call barring option.
Be sure that you have switched off the loudspeaker.
Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The number of bars indicates the signal strength.
Try moving the phone slightly or moving closer to a
window if you are in a building.