Safety Recommendations - S&P DECOR-100 Bedienungsanleitung

ENGLISH
EN
DECOR Axial Extractor Fans
This instruction manual contains im-
portant information and must be read
carefully by competent persons prior
to any handling, transport, inspection
or installation of this product. Every
care has been taken in the preparation
of the instructions and information;
however, it is the responsibility of the
installer to ensure the system com-
plies with relevant national and inter-
national regulations, especially safety.
The manufacturer, Soler & Palau Sis-
temas de Ventilación S.L.U. accepts
no responsibility for breakages, acci-
dents or any inconvenience caused by
failure to comply with the instructions
contained in this manual.
The fans referred to in this manual
have been manufactured in accord-
ance with rigorous quality control and
International standard ISO 9001.
We recommend you to check the fol-
lowing points when you receive this
extractor:
1-Make sure you have received the
right model
2-Make sure that the data on the
nameplate are appropriate to your
needs: voltage, frequency, speed,
etc.
Once the product has been installed,
this manual to be retained by the end
user.
12
SAFETY
RECOMMENDATIONS
The installation must
be carried out in ac-
cordance with current
regulations in each
country. The installa-
tion must be carried
out by a qualified pro-
fessional.
The electrical instal-
lation must
porate an omnipolar
switch with an open-
ing between contacts
of at least 3 mm, ap-
propriate for the load
and complying with
current standards.
In bathrooms, the de-
vice must be installed
outside the reach of
any person taking a
shower or a bath and
incor-