Dish Setup; Lnb Settings - Reflexion LED2223 Bedienungsanleitung

CHANNEL MENU SATELLITE

Dish Setup:

1. The satellite configuration is divided into two sections. On the left is the satellite /
transponder list.
2. On the right side you will find the LNB settings.
Transponder list / Satellite list
Transponder list
Satellite list:
Select
Edit
Add
Delete
Scan
Exit
Edit / Add:
1. Select a "transponder / satellite" to be processed.
2. Press the [Green / Yellow] button.
3. The following settings can be adjusted.

Satellite: Satellite name / Longitude direction / Longitude angle / Band

Transponder: Frequency / SR (ks/s) Symbol rate / Polarity

LNB settings

1. Press the [►] key to get from the "Transponder list" to the "LNB settings".
2. The following settings are available.
Note:

The LNB settings are only recommended for experienced users.
LNB Type
LNB Power
22KHz
Toneburst:
DiSEqC1.0
DiSEqC1.1
Motor
Press the [EPG] key to toggle between the transponder or satellite list.
Press the [OK] key to confirm the selection.
Press the [Green] key one time
To edit satellites or transponders.
Press the [Yellow] button to add a new transponder or satellite.
Press the [Red] button to delete a satellite or transponder.
Press the [Blue] key to start the search on a transponder or satellite
marked with the [OK] key.
Press the [Blue] key to start the search on a transponder or satellite
marked with the [OK] key.
05150/05750, 09750/10600, 09750/10700, 10000/10450, 05150,
05750, 09750, 10200, 10600, 10750, 11250, 11300, 11475, User
Single, User Dual, Unicable
13/18V, 13V, 18V, Off
Auto, Off, On
None, BurstA, BurstB
None, LNB1, LNB2, LNB3, LNB4
None, LNB1 ~ LNB16
None, DiSEqC1.2, DiSEqC1.3
47
UK