Safety Instructions; Installation And Commissioning; English - Noark Ex9EVD3 T2 Bedienungsanleitung

WALL-MOUNTED EV CHARGER
Ex9EVD3 T2

Safety instructions

■ Please read the package leaflet carefully before using the wall-mounted EV charging station. Failure to follow the instructions and warnings below
may result in fire, electric shock, serious injury or death.
■ Wall-mounted EV charging stations are intended only for charging of the electric vehicles in accordance with IEC 62196-1 and IEC 61851-1 stan-
dards. Do not use the accessories for vehicles that require ventilation during charging, or for other purposes, with other vehicles or objects.
■ Do not use the wall-mounted EV charging station in combination with sockets that do not comply with regulations and standards.
■ If the EV charging station is damaged or LED diode indicates a serious problem, do not use it.
■ The user is not authorized to disassemble, open, modify or repair the wall-mounted EV charging station. The exception is installation by a professio-
nally qualified person. In the event of a malfunction or necessary repair, please contact the seller.
■ Do not disconnect the charging cable from the electric vehicle while charging is in progress.
■ The wall-mounted EV charging station must always be installed in accordance with local regulations and standards and positioned so that it does not
obstruct the movement of pedestrians, other vehicles or objects.
■ Do not unnecessarily expose the wall-mounted EV charging station to external influences such as heavy rain or snow. Do not expose the Wallbox
to moisture or water, including submersion.
■ Do not place flammables, explosives, flammable materials, chemicals, flammable vapors or other dangerous objects near the charging stations.
■ Never touch the terminals with sharp objects or other dangerous tools. Do not damage the Wallbox with these objects either.
■ Do not let children and unauthorized persons handle the charging accessories. Improper handling and subsequent use of the charging station may
result in electric shock, fire, serious injury or death.

Installation and commissioning

1.
1. The Wallbox must be installed within the framework of applicable regulations and standards.
2. 2. Install the wall-mounted EV charging station directly on a flat wall in a convenient position for operation and maintenance. Installation instructions are
on page X. If installed outdoors, the wall-mounted EV charging station should be placed under a roof to avoid direct exposure to rain.
3. Connect the power cable correctly to the wall-mounted EV charging station according to the wiring diagram on page 4. The supply cables must be of
3.
suitable cross-sections according to the maximum charging current and must be protected by a suitable circuit breaker in the superior switchboard.
(NOTE: Electrical installation must be carried out by a suitably qualified person!)
4. 4. Turn on the wall-mounted EV charging station by opening the front cover and turning on the type B circuit breaker inside the charging station.
5. 5. The self-test process starts, the status LED lights red, blue and green. Wait until the status LED starts flashing blue.
6. 6. If everything is OK, the status LED will start flashing blue. You can now plug the plug of the wall-mounted EV charging station into the electric vehicle.
Charging will start automatically.
Description of the charging station
Marking according to page 3.
1 - Mounting holes
2 - LED signaling of the maximum set value of the charging current in amperes
3 - RGB button for signaling
4 - Front cover screws
5 - Charging cable
Professional qualification requirements
Installation and commissioning should only be carried out by an authorized person in accordance with regulations. The knowledge of the
electrician installing the Wallbox should be in the following range
■ Wallbox connection
■ Securing the Wallbox
■ Wallbox grounding
■ Isolation status of the Wallbox
■ Installation and commissioning should only be carried out by an authorized person in accordance with regulations.
■ Before installation, make sure that the supply cable is not live!
■ The charging station is intended for installation on a vertical wall or on a solid surface.
■ Packaging of the charging station does not contain dowels, screws or other anchoring elements intended for the installation on the wall.
■ The charging station must be opened for installation.
■ Drill or cut holes in the indicated places for the anchoring mechanism of your choice.
■ If the supply cable will be routed through the wall, additional sealing material must be used to prevent water from entering around the supply cable.
■ Attach the charging station to the wall or floor and make sure it is firmly in place.
■ Insert the power cable through the dedicated input in the wallbox, unscrewing the premounted cover. Connect the input power cables to their corre-
sponding terminal individually.
■ Carefully cover the charging station with the front cover and tighten the appropriate screws.
■ When installing the front cover, make sure that the power or low-current wires are not in the way of the mechanical components - especially the
screws of the front cover!
External switching of the Wallbox
■ The Wallbox may optionally be disabled or enabled using external switching elements (e.g. relays). The two terminals marked as „VNB" are used for
this remote control connection inside the Wallbox. If the remote control function is not needed (commonly used to control the charger based on tariff
changes), connect a jumper in the Wallbox between these terminals. However, if the remote control feature is required, please remove the jumper
between those terminals, and ensure that they are connected to a voltage free switching device (e.g. both terminals of a normally open relay). The
contacts of the switching element must be able to control approximately 30 mA/12 V.
6
EN