dB Technologies OPERA REVO Coax Quasi Bedienungsanleitung Seite 2

EMI CLASSIFICATION
According to the standards EN 55032 and 55035 this is a Class A equipment, designed and suitable to operate for
professional use.
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
FCC CLASS A STATEMENT
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damag-
es to persons or properties. Before hanging the loudspeaker check all the components for damages, deformations,
missing or damaged parts that may compromise safety during installation. If you use the loudspeakers outdoor avoid
spots exposed to bad weather conditions. Contact dB Technologies for accessories to be used with speakers. dBTech-
nologies will not accept any responsibility for damages caused by inappropriate accessories or additional devices.
Features, specification and appearance of products are subject to change without notice. dBTechnologies reserves
the right to make changes or improvements in design or manufacturing without assuming any obligation to
change or improve products previously manufactured.
WARNING
Only expert personnel may use the product and its accessories! To prevent hazards to people, animals and/or objects, make
sure that the installation is stable and secure. Comply with the safety regulations and laws in force in the country in which
you use the product. For safe use, periodically check that all parts are in good working condition before use. Only autho-
rised personnel may carry out design, calculations, installation, testing and maintenance of professional flown or stacked
audio systems. AEB Industriale shall not be liable for improper installation carried out without adequate safety measures.
Never suspend the speakers from the handles! Only use the accessories and configurations described in this manual, and proceed in accordance
with the instructions given in the manuals for the accessories.
Do not obstruct the amplifier cooling fins at the back. In the event of overheating, the audio volume is gradually reduced until the module
is thermally stable. The level is automatically restored on reaching the correct operating temperature. Do not attempt to open the amplifier.
In the event of malfunction, immediately turn off the power, disconnect the unit from the mains and contact an authorised service centre.
Only use the power cable provided. Do not use the monitor for a prolonged period with the limiter LED steadily lit or flashing as this indicates
operation under stress with excessive distortion.
Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installation. User should never
apply a load that exceeds the working load limits of any rigging components or equipment here presented. Design, calculation, installation,
testing and maintanance of suspension and stack systems for audio equipment must be performed only by qualified and authorized personnel.
AEB Industriale s.r.l. denies any and all responsibility for improper installations, in the absence of safety requirements.
OPERA REEVO
II
Italiano
Cod. 420120426 REV. 1.0