Pkm 9031 X Bedienungsanleitung Seite 54

WARNING! Switch off the appliance and disconnect it from the mains
before you install any carbon filters (use the relevant fuse in your
household fuse box).
1. If you want to replace the
GREASE FILTER
downwards (s. fig. below).
2. The
CARBON FILTER
3. Place the
CARBON FILTER
tightened (s. fig. below).
A
M
B
C
ARBON FILTER
C
LOCKWISE ROTATION
C
and turn the filter clockwise until it is installed properly.
4. Reinstall the
ALUMINIUM GREASE FILTER
5. If you want to uninstall the
remove it.
WARNING! Install the carbon filter safely and properly; otherwise, the
carbon filter can loosen and cause hazardous situations.
NOTICE! The suction capacity is decreased by installed carbon filter.
H
OW TO INSTALL THE CARBON FILTER
CARBON FILTER
first. Press the lock and pull the
is installed on the motor.
on the motor and turn it clockwise until it is firmly
Fig. similar: modifications are possible.
OTOR
CARBON FILTER
, you must remove the
ALUMINIUM GREASE FILTER
= Place the
CARBON FILTER
.
, turn the filter anti-clockwise and
~ ~
54
ALUMINIUM
on the motor