Setting Cooking Time; Setting The Timer - Bauknecht ELCK 7263 Benutzer- Und Wartungshandbuch

USING THE ELECTRONIC PROGRAMMER
A
U
T
O
1 2
Using the oven for the first time
Setting the time of day and the tone of the acoustic signal.
Upon connection of the oven to the mains power supply, AUTO and 0.00 flash on the display. To set the
time of day, press buttons - and + at the same time: the two central dots flash. Set the time of day using the
buttons + and -. Having selected the desired value, press the middle button. The display shows "ton 1". To
select the desired tone, press button -. Having selected the preferred tone, press the middle button. To
change the time of day, proceed as described above.

Setting cooking time

After selecting the cooking mode and temperature using the knobs, press the middle button: the display
shows 0.00 and the bell symbol flashes. Press the middle button again: on the display
in sequence and AUTO flashes. Set cooking time using the buttons + and - (the maximum programmable
value is 10 hours). After a few seconds the display shows the time of day and AUTO remains lit, confirming
the setting. To view the remaining cooking time and change it if necessary, press the middle button for 2
seconds and then press it again a second time. At the end of the set time, the symbol
alarm sounds and AUTO flashes on the display. Press any button to deactivate the alarm. Return the
functions and temperature knob to zero and press the middle button for two seconds to end cooking.
Delaying cooking end time
After selecting cooking time, press the middle button: the display shows
flashing in sequence. Press the button + to view the desired cooking end time (cooking can be delayed by
a maximum of 23 hours and 59 minutes). After a few seconds the display shows the time of day, the
symbol switches off and AUTO remains lit, confirming the setting. To view cooking end time and
change it if necessary, press the middle button and then press it again twice. At the end of the countdown,
the symbol lights up and the oven proceeds with the selected cooking mode.

Setting the timer

To set the timer, long-press the middle button: the display shows 0.00 and the bell symbol flashes. Set the
timer using the button + (the maximum programmable value is 23 hours and 59 minutes). The countdown
begins after a few seconds. The display shows the time of day and the bell remains lit, confirming the timer
has been set. To view the countdown and change it if necessary, press the middle button again.
1. Button - : to decrease the value shown on the display
B
2. Button
a. Timer
b. Cooking time
A
c. Cooking end time setting
3. Button + : to increase the value shown on the display
A. The symbol
B. The AUTO symbol confirms the setting has been made
3
: for selecting the various settings:
indicates that the timer function is in operation
GB26
and 0.00 appear
switches off, the
, cooking end time and AUTO