Whirlpool AGB 667/WP Gebrauchsanweisung Und Installation Seite 23

6.6 Total drainage at the end of the day
Do not turn off the dishwasher while water is still in the tank. Always drain it first. When finished using
the machine, after having performed the final drainage, turn the machine off by pressing the on/off
button, deactivate the wall switch and turn off the water interception faucet. Do not leave the
machine on, inactive and unutilized for long periods of time.
11
Once the cycle has started, the wash cycle led indicator
light turns on. If the hood is lifted during the cycle,
the program stops and resets itself; lower the hood again
to restart the cycle.
Once the program has finished, the wash cycle led
indicator light turns off.
Lift the hood and remove the rack.
Total drainage at the end of the day (models with
drain pump)
Turn the machine off by pressing the on/off
button, lift the hood, remove the overflow and hold
down the drain pump button
been emptied.
In order to reactivate the machine it is therefore
necessary to place the overflow back into the tank,
lower the hood and press the on/off
Otherwise, if finished using the machine, deactivate the
general wall switch.
Total drainage at the end of the day (models
without drain pump)
Turn the machine off by pressing the on/off
button, lift the hood, remove the overflow and wait for
the tank to empty completely. Place the overflow back
into the tank and lower the hood. Deactivate the
general wall switch.
until the tank has
button.