Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Matters
• The charger is designed for charging 6 / 12V lead-acid batteries.
Do not use the charger for any other purpose.
• Check the charger cables prior to use. Ensure that no cracks
have occurred in the cables or in the bend protection. A charger
with damaged cables must not be used. A damage cable must
be replaced by a related professional.
• Never charge a damaged battery.
• Never charge a frozen battery.
• Never place the charger on top of the battery when charging.
• Always provide for proper ventilation during charging.
• Avoid covering the charger.
• A battery being charged could emit explosive gasses. Prevent
sparks close to the battery. When batteries are reaching the end
of their Ilfe cycle Internal sparks may occur.
• All batteries fall sooner or later. A battery that falls during
charging Is normally taken care of by the chargers advanced
control, but some rare errors in the battery could still exist. Don't
leave any battery during charging unattended for a longer period
of time.
• Ensure that the cabling does not jam or comes into contact with
hot surfaces or sharp edges.
• Battery acid is corrosive. Rinse immediately with water if acid
comes into contact with skin or
eyes, seek immediate medical advice.
• Batteries consume water during use and charging. For batteries
where water can be added, the water level should be checked
regularly. If the water level Is low add distilled water.
• This appliance is not designed for use by young children or
people who cannot read or understand the manual unless they
are under the supervision of a responsible person to ensure
that they can use the battery charger safely. Store and use the
battery charger out of the reach of
children, and ensure that children cannot play with the charger.
• Connection to the mains supply must be In accordance with the
national regulations for electrical Installations.
Instrukcja obsługi
EN
15
Werbung
Inhaltsverzeichnis
