Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instrukcja obsługi
Charging Steps Instruction
Soft
Bulk
Analyse
Float
Devulca-
Absorption
Recond
start
Pulse
nization
Step 1: Devulcanization
Detects vulcanized batteries. Pulsing current and voltage,
removes lead-sulfide from the lead plates of the battery restoring
the battery capacity.
Step 2: Soft Start
Tests if the battery can accept charge. This step prevents that
charging proceeds with a defect battery.
Step 3: Bulk-Charging
Charging with maximum current until approximately 80% battery
capacity
Step 4: Absorption
Charging with declining current to maximize up to 100% battery
capacity
Step 5: Analysis
Tests if the battery can hold charge. Batteries that can not hold
charge may need to be replaced.
EN
Step 6: Recond
Choose the Recond program to add the Recond step to the
charging process. During the Recond step voltage increases to
create controlled gasing in the battery. Gasing mixes the battery
acid and gives back energy to the battery.
Step 7: Floating-charging
Maintaining the battery voltage at maximum level by providing a
constant voltage charge
Step 8: Pulse
Maintaining the battery at 95-100% capacity. The charger
monitors the battery voltage and gives a pulse when necessary to
keep the battery fully charged.
13
Werbung
Inhaltsverzeichnis
