Troubleshooting - BOMANN SBS 7344 Bedienungsanleitung, Garantie

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

Changing the light

CAUTION:

Do NOT remove the cover of the light. The LED light

may be replaced / repaired in case of failure / defect

only by an authorized specialist.

Notes for the authorized specialist!

Lamp data: DC12V, 2 W

This product contains a light source of energy effi-

ciency class G.

• Disconnect the appliance from the power supply!

• Loosen the decorative cover with a screwdriver.

• Carefully unlock the lamp cover.

• Release the lamp from the holder, pull it out and

disconnect the plug connection.

• Replace defective lamp and reassemble properly

in reverse order.

Replacing the door hinge

If the appliance door starts to stutter, crack or jam

when you open it, it is probably due to a worn or

damaged hinge.

It is recommended to replace all door hinges at the

same time, otherwise the next repair will soon be

beckoning.

• Remove the contents of the appliance and the

movable interior parts.

• Tilt the appliance backwards and block it in this

position to prevent the door from sliding out.

• Loosen the hinge cover and disassemble the

upper door hinge.

• If necessary, first turn out the stand and disas-

semble the lower door hinge.

• The respective hinge assembly is carried out in

reverse order.

• Open and close the appliance door for a test run,

readjust the hinges if necessary. In any case,

make sure that the door fits tightly and accurately.