Spray Arms - Kuppersberg GSM 6072 Bedienungsanleitung

ENGLISH

SPRAY ARMS

It is necessary to clean the spray arms regularly for hard water chemicals will
clog the spray arm jets and bearings.
To clean the spray arms, follow the instructions below:
To remove the upper spray arm, hold
the nut in the center still and rotate
the spray arm counterclockwise to
remove it.
Wash the arms in soapy and warm
water and use a soft brush to clean
the jets. Replace them after rinsing
them thoroughly.
TECHNICAL PASSPORT
To remove the lower spray arm, pull
out the spray arm upward.
Dishwasher
61