Philips HQ8893 Bedienungsanleitung Seite 9

C
6
You can also clean the hair chamber without
water by using the brush supplied.
Every six months: shaving heads
C
1
2
1
2
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
3
4
Trimmer
Clean the trimmer every time you have used it.
1
Open the shaving unit again and leave it
open to let the appliance dry completely.
Open the shaving unit, turn the wheel
anticlockwise (1) and remove the retaining
frame (2).
Clean the cutters and guards with the
brush supplied.
Put the shaving heads back into the shaving
unit. Put the retaining frame back into the
shaving unit, press the wheel (1) and turn it
clockwise (2).
Close the shaving unit.
Switch the shaver off, remove the
powerplug from the wall socket and pull
the appliance plug out of the shaver.
ENGLISH
11