Cleaning Air/ Water Heat Exchanger - Disassemble Unit Cover - Pfannenberg PWS 6302 T Serie Betriebsanleitung

GB
5.2

Cleaning air/ water heat exchanger - disassemble unit cover

Requirement
- Air/water heat exchanger has been de-energized
Procedure
▪ Remove the fastening screws (1).
▪ Tilt the unit cover (2) forward.
 For units with display or operating unit: Disconnect the ground cable and connecting cables from the display or
operating unit (inside) (3).
▪ Pull off unit cover (2).

The unit cover is removed.
Operating manual PWS and PWI 6302 T 785408478 © Pfannenberg GmbH
1
1
Figure 17 – Unit cover removal
2
3
Page 25 / 31