Cleaning The Air/Water Heat Exchangers - Removing Unit Cover - Pfannenberg PWT 6402 230V Betriebsanleitung

GB
5.2

Cleaning the air/water heat exchangers - removing unit cover

Requirements
-
Air/water heat exchanger is without voltage
Procedure

Remove fixing screws (1).

Lift the unit cover (2) upwards.
 Remove the earth cable from the cover (inside) (3).

Pull off the unit cover (2).

Unit cover is removed.
Operating Manual PWT 6402 230V / 400V 086100107 © Pfannenberg GmbH
Figure 16 – Removing unit cover
Page 25 / 30