Using The Shaver - Philips arcitec rq 1075 22 Bedienungsanleitung

 First insert the top of the shaver into the
Power Pod (1) and then press the bottom part
into the Power Pod (2).
Note: The shaver cannot be placed in the Power Pod
when the protection cap is on the shaving unit.
The display shows that the shaver is charging
,
(see chapter 'The display').
charging in the Jet clean system
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
 Place the shaver upside down in the holder
with the display pointing towards the front of
the Jet Clean System.
Note: RQ1090,RQ1060 only: when you turn the shaver
upside down, the indications on the display are also
turned upside down so you can still see the remaining
battery capacity.
 Press the shaver tightly into the holder to lock
it into place.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
The display shows that the shaver is charging
,
(see chapter 'The display').

using the shaver

shaving
1 Press the on/off button once to switch on the
shaver.
English
15