External Audio Sources; Front Aux Input; Rear Aux Inputs; Adjusting The Level Of The Aux Input - Bosch Calais USB40 Bedienungs- Und Einbauanleitung

External audio sources

External audio sources
You can connect different types of external
audio sources to the device via the three AUX
inputs:
Front AUX-IN socket (AUX FRNT)
f
Rear AUX inputs (AUX1REAR, AUX3REAR)
f

Front AUX input

Increased risk of injury from
plugs!
Plugs that stick out of the front AUX
IN socket 9 can cause injuries in
the event of an accident.
For this reason you should only use
angled jack plugs.
As soon as an external audio source is inserted
into the front AUX IN socket 9 it can be
selected with the SRC > button. The display
shows "AUX FRNT".

Rear AUX inputs

Various external audio sources, such as
portable CD players, MiniDisc players or MP3
players can be connected to the device through
the rear AUX inputs.
Note:
In the NAFTA version of the device,
the rear AUX input "AUX3" is
designed for connecting an XM or
Sirius satellite tuner.
Before you can use the rear AUX inputs you
must switch them on through the menu (see
Robert Bosch Car Multimedia GmbH
the section on "Switching the rear AUX inputs
on or off" in this chapter).
As soon as the AUX inputs are activated, you
can select them by pressing the SOURCE >
button. The display then shows "AUX1REAR" or
"AUX3REAR".
Switching the rear AUX inputs on
or off
f Press the MENU 7 button to open the
menu.
f Press the MENU 7 button repeatedly
until "AUX1" or "AUX2" appears on the
display, along with the current setting,
"OFF" or "ON".
f Turn the volume controller 1 to the left
or right in order to switch the input on or
off.
f Press the MENU 7 button, repeatedly if
necessary, to close the menu.
Adjusting the level of the AUX
input
You can adjust the level separately for each
AUX input, in order to match the level of the
external audio source to the level of the
device's own audio sources (such as the CD
and radio).
Note:
You can adjust the level for an AUX
input only when this input is selected
as audio source with the SRC >
button.
f Press the SRC > button until the AUX
source that you want is displayed.
en | 59