Error Codes - Kuppersberg GLM 6096 Bedienungsanleitung

ENGLISH

ERROR CODES

If there is a malfunction the dishwasher will display an error code. The following
table shows possible error codes and their causes.
Codes Meanings
E1 Longer inlet time.
E3 Not reaching required
temperature.
E4 Overflow.
Ec Failure of the washing
control system
L4 Motor failure
Ed Failure of
communication
between main circuit
board with display
circuit board
WARNING
 If overflow occurs, turn off the main water supply before calling a service.
 If there is water in the base pan because of an overfill or small leak, the
water should be removed before restarting the dishwasher.
 If there is an error code that cannot be solved, please request professional
assistance.
Please note!
The following shall not be considered as defects of the Product
Discoloration of product materials during operation
Natural noise of water spraying during product operation
Minor technical smells coming from a new product during the initial operation period
Possible Causes
Faucets is not opened, or water intake is restricted,or water
pressure is too low.
Malfunction of heating element .
Some element of dishwasher leaks .
Defective PCB, drain pump or motor failure
Motor failure
Open circuit or break wiring for the communication
TECHNICAL PASSPORT
Dishwasher
95