Error Codes - Kuppersberg GFM 5572 W Bedienungsanleitung

TECHNICAL PASSPORT
Dishwasher

ERROR CODES

If there is a malfunction the dishwasher will display an error code. The following
table shows possible error codes and their causes.
Codes
E1 Longer inlet time.
E3 Not reaching required temperature.
E4 Overflow.
Failure of communication between main
Ed
PCB with display pcb.
WARNING
 If overflow occurs, turn off the main water supply before calling a service.
 If there is water in the base pan because of an overfill or small leak, the
water should be removed before restarting the dishwasher.
 If there is an error code that cannot be solved, please request professional
assistance.
Please note!
The following shall not be considered as defects of the Product
Discoloration of product materials during operation
Natural noise of water spraying during product operation
Minor technical smells coming from a new product during the initial operation period
80
Meanings Possible Causes
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
Malfunction of heating element .
Some element of dishwasher leaks .
Open circuit or break wiring for the
communication
ENGLISH