Herunterladen Diese Seite drucken

LGB 50110 Bedienungsanleitung Seite 6

Vorschau ausblenden Andere Handbücher für 50110:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

USA
GB
50110
AC Transformer 120 VA
Input 230 V, 50 Hz
Output 20 V AC, 6 A, 50 Hz
50111
AC Transformer 120 VA
Input 120 V, 60 Hz
Output 20 V AC, 6 A, 60 Hz
THE PRODUCT
This high-output AC transformer
is the core of the LGB Universal
Power program. It provides 6
amps of AC current for:
- LGB Multi-Train System digital
layouts
- traditional analog layouts with
LGB analog throttles 51070,
52120 and 52121
- AC-powered accessories, like
LGB switches, signals and stre-
et lamps
This transformer features:
- dual, spring-loaded output ter-
minals
- short circuit and overheating
protection
- LED status indicators
- base dimensions (not including
tabs): 121 x 162 mm
THE PROGRAM
This transformer is part of the
LGB program of quality G-scale
trains and accessories. With this
model, we recommend:
- 55000 Multi-Train System Star-
ter Pack
- 51070 Analog Throttle, Indoor,
5A
- 52120 Analog Throttle, Outdoor,
5A
- 51750 EPL Control Box
For more information on the com-
plete LGB program, see the LGB
catalog.
OPERATION
CAUTION! Safety advice:
- Do not use this transformer with
older LGB analog throttles (e.g.
50070, 50120, 50121, 51120).
Only throttles designed for ope-
ration with AC current may be
connected to this transformer.
- Do not connect two transformers
together (Fig. 4). This can hap-
6
pen accidentally if two transfor-
mers are connected to the same
track.
- This transformer should be ins-
pected regularly for possible
dangers, such as damage to the
cables, plugs or housing. If
damage is found, do not use this
power supply. The house current
cable cannot be replaced.
- Disconnect
from house current before clea-
ning the housing.
- Disconnect
from house current if there is a
short circuit or overload. Remo-
ve the short circuit or overload
before connecting the power
supply again.
- This transformer is for indoor
use only. Keep it away from moi-
sture. Do not install it in an enc-
losed space.
- This transformer is for use with
LGB/LEHMANN products only.
- This transformer is not a toy.
This transformer is not for child-
ren under 8 years of age.
- Save the supplied instructions
and packaging.
Connections
Hint: This transformer can be
used with many different devices.
Read the instructions for the indi-
vidual device for more detailed
instructions.
Connect the transformer using
the spring-loaded terminals on
the rear of the transformer (Fig.
2). Push the button on the termi-
nal and insert the wire in the hole.
Hint: Connect one wire to a „3"
terminal and the other wire to a
„4" terminal.
Hint: Twist the wire ends before
inserting them into the terminal
(Fig. 3).
Plug the power pack cord into a
house current outlet.
Indicators
There are two LED indicators on
the front panel. The power indica-
tor (Fig. A) glows green when the
transformer
house current. The overheating
indicator (Fig. B) glows red when
the transformer is overloaded.
Overload Protection
This transformer is protected
against short circuits and overloa-
ding. If there is a short circuit or
overload, unplug the power pack
cord from the house current outlet
immediately:
1. Short circuit: Find and remove
the short circuit. Reset the cir-
cuit
breaker
this
transformer
this
transformer
is
connected
(Fig.
to
C).

Werbung

loading