Description Of The Appliance; Instructions For Use - eta CRYSTELA Digi II Bedienungsanleitung

EN
– The power cord must not be damaged with sharp or hot objects, open fire, it must not
be sunk into water or bent over sharp edges.
– If you need to use an extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
II. DESCRIPTION OF THE APPLIANCE
A – electric kettle
A1 – water gauge
A2 – handle
A3 – lid
A4 – lid lock button
A5 – signal lights
B – control panel *
B1 – ON/OFF switch;100°C/KEEP
WARM
B2 – temperature setting button
B3 – signal lights indicating the selected
temperature / KEEP WARM function
* The control electronics ensures the appliance turns off automatically after the set
temperature or boil of water has been reached.
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the electric kettle with the stand. Remove all
possible adhesion foils, stick-on labels or paper from the appliance. Before the first use, fill
the electric kettle with clean water to the maximum level, turn it on and let the water boil.
Then pour out the water and repeat the procedure several times (at least five times).
APPLICATIONS
Unwind the necessary length of the power cord C2 from the storage space of the stand C.
Place the stand on a suitable surface, in the height of about 85 cm, out of reach of children
and incapacitated persons and plug the fork of the power cord to the electric socket (you
will hear a signal sound and signal light indicators will flash). Hold the kettle A on the handle
A2. Open the lid A3. Fill the kettle with drinking water. Minimum and maximum water level is
indicated by the watermark A1. Close the lid and position the kettle filled with water onto the
removable base C (you will hear a signal sound and the signal light indicators A5 will flash).
A) Water heating to 100°C
Press the button B1 to automatically switch on the kettle to a temperature of 100 °C; the
background colouring of the signal lights A5 will come on. By pressing the button B1
repeatedly, the kettle will switch off.
As soon as the required temperature is reached, the kettle will switch off.
B) Water heating to a temperature of 50-90°C
Press the button B2 repeatedly to set the required temperature from the following options:
50-70-80-90°C; the selected temperature is indicated by the appropriate signal light indicator
B3. Confirm the selected temperature by pressing the button B1 which will put the kettle on;
at the same time, the background colouring of the signal lights A5 will come on. As soon as
the required temperature is reached, the kettle will switch off. During the heating process, you
can change the selected temperature by pressing the temperature selection button B2.
C – removable stand
C1 – central connector
C2 – supply cord
18 / 38