EN
II. DESCRIPTION OF THE APPLIANCE
A – electric kettle
A1 – ON/OFF button
A2 – Set Temperature/Functions button
A3 – handle
A4 – lid
A5 – lid lock button
A6 – LED display
* The control electronics ensures the appliance turns off automatically after the set
temperature or boil of water has been reached.
III. INSTRUCTIONS FOR USE
Before the first use, fill the electric kettle with clean water to the maximum level, turn it on
and let the water boil. Then pour out the water and repeat the procedure several times
(at least five times).
APPLICATIONS
Unwind the necessary length of the power cord B2 from the storage space of the stand B.
Place the stand on a suitable surface, in the height of about 85 cm, out of reach of children
and incapacitated persons and plug the fork of the power cord to the electric socket. Hold
the kettle A on the handle A3. Open the lid A4 by pressing the lock button A5. Fill the kettle
with drinking water. Minimum and maximum water level is indicated on the water level scale
inside the electric kettle. Close the lid by snapping. Put the electric kettle on the stand (sound
signal will be given, signal lamps over A1 and A2 will flash once, and water temperature will
be displayed on A6). Required temperature can be set by short pressing A2. Start the boiling
process by short pressing of button A1 ( signal lamp will light up on display A6, over the " "
sign). Then wait until the heating process is completed (sound signal). Standard heating to the
preset temperature and maintaining temperature (KEEP WARM) functions can be switched
over by long pressing A2. During the heating phase, preset temperature can be changed by
pressing A2. The heating phase can be interrupted by short pressing A1. After approx. 20
minutes of inactivity, the kettle will be switched off automatically.
• 40 °C = infant formula milk,
• 50 °C = baby foods,
• 60 °C = hot beverages,
• 70 °C = green tea,
• 80 °C = white teas,
• 90 °C = oolong teas, coffee, instant drinks, soups,
• 100 °C = black, herbal teas.
If you are going to heat up water to a low temperature (40-70 °C), it is advisable to
have at least 0.7 litre of water in the kettle to reach the preset temperature more
accurately. In the case of a lower volume, the actual temperature may exceed the
Always use fresh drinking water for boiling. The temperature and time heating depends
on the amount of water and the initial temperature of water. For the correct temperature
setting, follow the manufacturers' instructions that are described on food packages (e.g. tea,
coffee, instant drinks, soaps, etc.).
B – removable stand
B1 – central connector
B2 – power cord
Note
preset temperature.
16 / 34