Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
Tips on energy saving
F
If there is not enough descaling
solution in the water tank, you will be
asked to do the following. Refill using
uncarbonated water and press C
again.
■ Remove the suction pipe from milk
container, wipe it and insert the end of the
suction pipe into the hole on the coffee
grounds container.
■ Close the appliance door.
■ Place a container with a capacity of
0.5 litre under the beverage outlet.
■ Touch C.
The programme will now run for about
19 minutes.
■ Remove the container and touch C.
■ Rinse the water tank and (if removed)
replace the water filter.
■ Fill the tank with fresh water up to the
"max" indicator.
■ Replace the water tank and close the door.
■ Place the container underneath the bev-
erage outlet again.
■ Touch C.
The programme will now run for about
7 minutes and rinse the appliance.
■ Remove the container, empty the drip
trays, replace and close the appliance
door.
■ Touch C. The appliance is descaled,
cleaned and ready for use again.
■ Touch E to exit the programme.
Special rinsing
F
Important: If any of the service
programmes is ever interrupted, for
instance by a power failure, please
proceed according to the information
on the display:
■ Rinse the water tank and refill it with fresh
water up to the "max" mark.
■ Touch C. The programme will now
run for about 2 minutes and rinse the
appliance.
■ Empty the drip trays, replace and close
the appliance door. The appliance is
ready for use again.
■ Touch E to exit the programme.
52
Tips on energy saving
■ Touch I to switch the appliance to
"energy saving mode". The appliances
uses very little power when in "energy
saving mode", but monitors all safety-rel-
evant functions so as to avoid damage.
■ In the menu under "Switch off after",
set the automatic switch off period to
15 minutes.
■ Reduce the brightness of the display
and the illumination in the menu to save
energy.
■ If possible, do not interrupt the dispensing
of coffee or milk froth. Stopping a process
prematurely results in higher energy
consumption and the drip tray fills up
more quickly.
■ Descale the appliance regularly to avoid a
build-up of limescale. Limescale residues
cause higher energy consumption.
Frost protection
To prevent frost damage during transport
and storage, completely empty the appli-
ance beforehand (see the section "Menu –
Frost protection").
Storing accessories
The fully automatic coffee machine has a
special accessory drawer for storing the
Quick reference guide and the accessories
in the appliance.
■ Put the measuring spoon and the water
filter into the accessory drawer.
■ Put the Quick Reference Guide into the
special support at the front of the acces-
sory drawer.
■ The long suction pipe can be stored in the
holder on the inside of the door.
■ The connecting element can be fixed to
the magnetic holder above the ground
coffee drawer.
Werbung
Inhaltsverzeichnis
