Adjusting The Grinding Unit; Checking The Water Hardness; Tips On Energy Saving - NEFF C77V60N2 Gebrauchsanleitung

Adjusting the grinding unit

The rotary selector (11) on the top of the
appliance adjusts the degree of grinding
from coarse to fi ne as required.
11 11
Warning:
Adjust the grinding unit only while it
is running. Otherwise the appliance
may be damaged.
1. Deploy the appliance fully
(see "Deployment system").
2. In the drink selection menu, select
.
E spresso
z
3. Press (6).
4. While the grinding unit is running, adjust
the rotary selector (11) from fi ne to
coarse or back as required.
The new setting will not become
apparent until after the second cup
of coffee.
Tip: For dark roast coffee beans, choose a
fi ner grind, for lighter beans a coarser grind.

Checking the water hardness

The water hardness setting can be adjusted
on this appliance. It is important to set
the water hardness correctly, so that the
appliance indicates accurately when the
descaling programme should be run. The
factory setting for the water hardness is 4.
Neff
You can check the water hardness using the
enclosed test strip or by asking your local
water supplier.
Dip the test strip briefl y in water, gently
shake off any drips, and check the result
after one minute.
Water hardness levels and settings:
Level Water hardness
German (°dH) French (°fH)
1 1 - 7
2 8 - 14
3 15 - 21
4 22 - 30

Tips on energy saving

The fully automatic espresso machine
X
switches to "energy saving mode" auto-
matically after one hour (factory setting).
The appliances uses very little power
when in "energy saving mode", but moni-
tors all safety-relevant functions so as to
avoid damage. The default time of one
hour can be shortened (see "Auto off
after" under "Displaying settings"). The
appliance then uses even less power.
The appliance is put into "energy saving
X
mode" by retracting the navigation button.
If the appliance is not being used, switch
X
it off at the power switch.
If possible, do not interrupt coffee or milk
X
froth dispensing. Stopping a process
prematurely results in higher energy
consumption and the drip tray fi lls up
more quickly.
Always descale the appliance when
X
Service - descale
"Descaling") to avoid a build-up of lime-
scale. Limescale residue results in higher
energy consumption.
English | 47
1 - 13
14 - 25
26 - 38
39 - 54
is displayed (see
C77V60N2 | 03/2011