Declaration Of Conformity; Mounting And Operation - Bosch AHS 45-15 Originalbetriebsanleitung

OBJ_BUCH-1685-004.book Page 16 Wednesday, September 23, 2015 10:57 AM
16 | English
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical data" is in conformity with all rele-
vant provisions of the directives until 19 April 2016:
2006/95/EC, from 20 April 2016 on: 2014/35/EU,
2011/65/EU, until 19 April 2016: 2004/108/EC, from
20 April 2016 on: 2014/30/EU, 2006/42/EC, 2000/14/EC
including their amendments and complies with the following
standards: EN 60745-1, EN 60745-2-15 (battery powered
product), EN 60335-1, EN 60335-2-29 (battery charger).
2000/14/EC: Guaranteed sound power level 90 dB(A).
Conformity assessment procedure according to Annex V.
Equipment category: 25
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 23.09.2015

Mounting and Operation

Action
Delivery Scope
Inserting the Battery
Starting
Stopping
Working Advice
Blade Maintenance
Storage and Transport
Selecting Accessories
Starting
Battery Charging
 Do not use other battery chargers. The supplied battery
charger is designed for the Lithium-Ion battery in your gar-
den product.
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
F 016 L81 269 | (23.9.15)
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 45 °C. In this manner, a high battery service life is
achieved.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
ion battery against deep discharging. When the battery is run
down or discharged, the garden product is shut off by means
of a protective circuit: The blade no longer moves.
been automatically switched off. The battery can be dam-
aged.
Charging Procedure
The charging procedure starts as soon as the mains plug is
plugged into the socket and the battery is then inserted into
the battery charger .
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery is
charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
Note: The charging procedure is only possible when the bat-
tery temperature is within the allowable charging tempera-
ture range, see section "Technical Data".
AL 1130 CV
Figure Page
Flashing Green Battery Charge Indicator
1 252
2 252
3 252
4 253
Note: The rapid-charging procedure is only possible when the
battery temperature is within the allowable charging temper-
5 253
ature range, see section "Technical Data".
6
254
Continuous Lighting of the Green Battery Charge
6 254
Indicator
7 254
Afterwards, the battery can be removed for immediate use.
When the battery is not inserted, continuous lighting of the
battery charge indicator indicates that the mains plug is in-
serted in the socket and that the battery charger is ready for
operation.
Do not continue to press the On/Off
switch after the garden product has
The rapid-charging procedure is signalled
by a flashing green battery charge indica-
tor .
Continuous lighting of the green battery
charge indicator indicates that the battery
is fully charged.
Bosch Power Tools