Technical Data; Cordless Hedge Trimmer; Noise/Vibration Information - Bosch AHS 45-15 Originalbetriebsanleitung

OBJ_BUCH-1685-004.book Page 15 Wednesday, September 23, 2015 10:57 AM

Technical Data

Cordless hedge trimmer

Article number
No-load stroke rate
Cutting length
Tooth opening
Weight according to EPTA-Procedure 01/2003
Serial number
Battery
Article number
Rated voltage
Capacity
Number of battery cells
Battery Charger
Article number
Charging current
Allowable charging temperature range
Charging period (battery discharged)
Weight according to EPTA-Procedure 01/2003
Protection class
Battery Charger
Article number
Charging current
Allowable charging temperature range
Charging period (battery discharged)
Weight according to EPTA-Procedure 01/2003
Protection class

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-15.
Typically the A-weighted noise levels of the product are:
Sound pressure level 67 dB(A); sound power level 87 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-15:
2 2
a <2.5 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
Bosch Power Tools
AHS 35-15 LI AHS 350 LI
3 600 H49 B.. 3 600 H49 B..
-1
min 2400
mm 350
mm 15
kg 1.9
See serial number (type plate) on the machine
Li-Ion
1 607 A35 02W 1 607 A35 02W
V 10.8
Ah 2.0
3
AL 1130 CV AL 1130 CV
EU 2 607 225 133 2 607 225 133
UK 2 607 225 135 2 607 225 135
AU 2 607 225 137 2 607 225 137
mA 3000
°C 0 – 45
min 45
0.3
kg / II
AL 1115 CV AL 1115 CV
EU 2 607 225 513 2 607 225 513
UK 2 607 225 515 2 607 225 515
AU 2 607 225 517 2 607 225 517
mA 1500
°C 0 – 45
min 80
kg 0.3
/ II
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
English | 15
AHS 45-15 LI
3 600 H49 A..
2400 2400
350 450
15 15
1.9 2.0
Li-Ion Li-Ion
1 607 A35 02W
10.8 10.8
2.0 2.0
3 3
AL 1130 CV
2 607 225 133
2 607 225 135
2 607 225 137
3000 3000
0 – 45 0 – 45
45 45
0.3 0.3
/ II / II
AL 1115 CV
2 607 225 513
2 607 225 515
2 607 225 517
1500 1500
0 – 45 0–45
80 80
0.3 0.3
/ II / II
F 016 L81 269 | (23.9.15)