eSolutions easyWallbox Installationshandbuch Seite 503

4.6. Removal of the power supply cable
Risk of electric shock.
Before starting installation, ensure that easyWallbox is not
connected to any power supply. Any installation, maintenance or
dismantling operation must only be carried out with the power
disconnected.
If easyWallbox
as indicated at Point 4 of Chapter 4.5 before continuing to the following steps.
1.
Remove the front panel of
was installed in Plug&Play mode, detach the removable cover
2
3
easyWallbox
1
4
by loosening the 4 screws.
29