Unpacking The Appliance - Clatronic WK 3452 Bedienungsanleitung

IMPORTANT:
Be sure to read the separately enclosed safety instructions first.
Instruction Manual
Thank you for choosing our product. We hope you will enjoy
using the appliance.
Read the instruction manual and the separately enclosed
safety instructions very carefully before using this appliance.
Keep these documents, including the warranty certificate,
receipt and, if possible, the box with the inner packaging in
a safe place. If you pass the appliance on to a third party,
always include all the relevant documents.
Symbols in this Instruction Manual
Important information for your safety is specially marked.
It is essential to comply with these instructions in order to
avoid accidents and prevent damage to the appliance:
WARNING:
This warns you of dangers to your health and indicates
possible injury risks.
CAUTION:
This refers to possible hazards to the appliance or other
objects.

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging material, such as foils, filling
material, cable ties and cardboard packaging.
3. Check the appliance for possible transport damage to
avoid hazards. Do not operate a damaged appliance.
Return it to the dealer immediately.
4. There may still be dust or production residues on the
appliance. We recommend that you clean the appliance
as described under "Cleaning".
Warnings for the Use of the Appliance
WARNING: Risk of Burns!
• Do not open the lid while the water is boiling.
• Always make sure that the lid is firmly closed.
• The appliance housing becomes hot during operation,
do not touch it and allow the appliance to cool down
before putting it away.
CAUTION: Overload!
• If you use extension cables, they should have a cable
cross-section of at least 1.5 mm².
• Do not use a multiple socket as this appliance is too
powerful.
WK3452_IM_new - SH separat
CAUTION:
• Always switch off the appliance before removing it
from the base! The contacts on the base are not suita-
ble for disconnecting the power supply.
• Make sure that the appliance is switched off when you
put it back on the base!
Notes for Use
Mains Cable
Unwind the required mains cable completely from the base
part of the base. Please pay attention to the routing of the
mains cable.
Connected Load
In total, the appliance can handle a power of 2200 W. With
this connected load, a separate supply line with a fuse
protection via a 16 A household circuit breaker is recom-
mended.
Electrical Connection
1. Check that the mains voltage you want to use matches
that of the appliance. You will find the information on the
type plate.
2. Only connect the appliance to a properly installed protec-
tive contact socket.
Switching the Appliance On / Off
• Switch on (switch position: I):
Switch on the appliance with the switch. The control
lamp lights up.
• Switching off (switch position: O):
Switch off the appliance with the switch. The control lamp
goes out.
Preparation
Before using the appliance for the first time, boil it 3 times
with fresh water. Use only clear water without additives.
Operation
1. Place the appliance on a flat surface.
2. Press the button on the handle to open the kettle.
3. Fill in clear water through the filler opening (maximum
1.8 litres). You can read the fill level on the appliance's
water level indicator.
- Always use fresh, cold water.
- The water level must be between the MIN and MAX
marks.
5
24.03.23