Dimensions; Installation; General - Hatco TOASTMAX TM3-5 Serie Installations- Und Bedienungshandbuch

SPECIFICATIONS

Dimensions

Width
Model (A)
TM3-5 and 290 mm
TM3-5H (11-7/16")
TM3-10 and 368 mm
TM3-10H (14-1/2")

INSTALLATION

General

The TOASTMAX Conveyor Toaster is shipped with all
®
components pre-assembled. Care should be taken when
unpacking the shipping carton to avoid damage to the unit and
the components enclosed.
WARNING
ELECTRIC SHOCK HAZARD: Unit is not weatherproof.
Locate unit indoors where ambient air temperature is a
minimum of 21°C (70°F).
EXPLOSION HAZARD: Do not store or use gasoline or
other flammable vapors or liquids in the vicinity of this or
any other appliance.
FIRE HAZARD:
• Locate unit a minimum of 25 mm (1") from combustible
walls and materials. If safe distances are not
maintained, combustion or discoloration could occur.
• Do not place anything on top of toaster. Do not place
toaster near or underneath curtains or other combustible
materials. Items near or on top of toaster could catch
fire causing injury and/or damage to the toaster.
1. Remove the unit from the carton.
NOTE: To prevent delay in obtaining warranty coverage, complete
online warranty registration. See the IMPORTANT
OWNER INFORMATION section for details.
2. Remove tape and protective packaging from all surfaces
of the unit.
3. Place the unit in the desired location.
• Locate the unit in an area where the ambient air
temperature is constant and a minimum of 21°C
(70°F). Avoid areas that may be subject to active air
movements or currents (i.e., near exhaust fans/hoods,
air conditioning ducts, and exterior doors).
Overall Unit
Depth (B) Depth (C)
535 mm 460 mm
(21-1/8") (18-1/8")
535 mm 464 mm
(21-1/8") (18-1/4")
A
E
D
F
Front View
Height Chamber
(D) Width (E)
412 mm 186 mm
(16-1/4") (7-3/8")
411 mm 264 mm
(16-3/16") (10-3/8")
B
C
G
Side View
• Make sure the unit is at the proper counter height in an
area convenient for use.
• Make sure the countertop is level and strong enough to
support the weight of the unit and food product.
• Make sure all the feet on the bottom of the unit are
positioned securely on the countertop.
4. Install the discharge chute.
a. Slide the discharge chute underneath the toaster.
b. Angle the curved end of the chute up slightly to place the
lip of the chute over the rear pins (one on each side).
Installing the Discharge Chute
6
Footprint Footprint
Width (F) Depth (G)
260 mm 314 mm
(10-1/4") (12-3/8")
338 mm 314 mm
(13-3/8") (12-3/8")
TM3CEM-0623