Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting Guide; Corrective Action - Hatco TOASTMAX TM3-5 Serie Installations- Und Bedienungshandbuch

Elektrische durchlauftoaster
Vorschau ausblenden Andere Handbücher für TOASTMAX TM3-5 Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
WARNING
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
Symptom
Toast too light.
Toast too dark.
Unit not working at all.
Toaster beeps continually.
Unit toasts on one side only.
Toaster trips the circuit breaker or
GFCI.
Troubleshooting Questions?
If you continue to have problems resolving an issue, please contact the nearest Authorized Hatco Service Agency or Hatco for
assistance. To locate the nearest Service Agency, log onto the Hatco website at www.hatcocorp.com, select the Support pull-
down menu, and click on "Find A Service Agent"; or contact the Hatco Parts and Service Team at:
Telephone: +1-414-671-6350
e-mail: support@hatcocorp.com
TM3CEM-0623
Probable Cause
Color Control knob set on a light setting.
Unit not warmed up. The toaster needs time to
heat up when initially turned on.
Supply voltage to unit is low.
Color Control knob set on a dark setting.
Supply voltage to unit is high.
Unit not plugged in.
Hi-limit switch tripped.
High Limit
Reset
Button
Fan is defective.
Fan filter is clogged.
The toaster is in Buns mode (one-sided toasting).
Heating element defective.
Circuit breaker is not sized properly for the
toaster.
Wiring fault inside toaster.

TROUBLESHOOTING GUIDE

ELECTRIC SHOCK HAZARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, maintenance, or
attempting to clear a jam.
Turn Color Control knob to a darker setting.
Allow approximately 15 to 20 minutes for the unit to
warm up.
Verify the supply voltage to the toaster matches the
unit specifications.
Turn Color Control knob to a lighter setting.
Verify the supply voltage to the toaster matches the
unit specifications.
Plug unit into proper power supply.
Check for the following:
1. Make sure hot air from other sources is directed
away from the front of the unit.
2. Make sure the fan filter is clean.
Press the High Limit Reset Button on rear of unit.
If problem continues, contact Authorized Service
Agent or Hatco for assistance.
Replace fan. Contact Authorized Service Agent or
Hatco for assistance.
Remove fan filter and clean using mild detergent
and rinse with water.
Press the "Bread"
sided toasting).
If the element does not glow, contact Authorized
Service Agent or Hatco for assistance.
Check circuit breaker for proper sizing.
Replace fan. Contact Authorized Service Agent or
Hatco for assistance.
9
WARNING

Corrective Action

( )
key for Bread mode (two-

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis