AEG VOXTEL S120 Startanleitung Seite 9

17
18
6 INSTALLING YOUR PHONE
6.1 Connecting the base station (see P5)
Plug the power adapter and line cord into the base station.
Plug the power adapter into a 210 - 240 V ac, 50/60 Hz mains socket and
the other end of the line cord into your telephone line socket.
Warning:
Always use the line cord provided in the box. Other line cords may not
be compatible and may not work.
Only use the power adapter supplied.
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2 Installing and charging the batteries (see P3)
Slide open the battery compartment cover.
Place the 2 batteries with the correct polarity, as shown.
Slide the battery compartment cover back.
Put the handset on the base and charge for 14 hours before first time
use. A beep indicates that the handset is properly placed on the base
or charger.
Warning:
Only use AAA size NiMH rechargeable batteries.
Speaker
In idle: Press to turn on/off the speaker phone.
During ring: Backlight LED will flash, press to answer
the incoming call.
During a call: Backlight LED will light on if speaker is
activated. Press to hang off the call.
M1/M2/M3/M4 - Direct Memory Keys
Press to call the number stored in the memory key.
9