AEG VOXTEL S120 Startanleitung Seite 11

7.2 Make a call from direct access memory
Using the handset:
In idle, press and hold M1/M2/M3 to dial the number pre-stored into
the keys respectively.
OR
Press , and then press and hold M1/M2/M3 to dial the number pre-
stored into the keys respectively.
Note:
You need to set the direct access number first.
>If no number is stored, you will hear double beeps tone.
Using the base:
In idle, press M1/M2/M3/M4 to dial the number pre-stored into the keys
respectively.
Note:
You need to set the direct access number first.
7.3 Answer a call
Using the handset:
If the handset is not on the charging cradle:
When the phone rings, press to answer a call, press it again to turn on
the speakerphone.
Note:
If the handset is on the charging cradle and if "AUTO ANS" is set to
"ON": when the phone rings, pick up the handset to answer a call auto
matically, without having to press any button.
Using the base:
When the phone rings, the base speaker LED will flash. Press
answer the call.
7.4 Audio boost feature
The audio boost feature allows you to amplify the handset earpiece
volume to compensate for the ear's limited sensitivity.
To turn on the audio boost feature, press
>The handset top indicator turns on.
at any time during a call.
11
to