Temperaturestabilization - Cloer 5200 Handbuch

hours keep warm function.
·
PLEASE NOTE: Let the appliance cool down
for about 5 minutes between two brewing pro-
cesses.

Temperaturestabilization

°C
Temperaturestabilized
The temperaturestabilization which is only ob-
tainable at Cloer filtre coffee makers, leads to
a constant brewing temperature from the first
up to the last drop. The system contains two se-
parate water tanks. In the main water tank the
water level is kept constant by a regulative float.
The water that is filled in is leaded with constant
water pressure through the heating system.
In this way the water will be heated optimally
from the beginning on and has already the right
temperature when getting in contact with the
coffee powder. The coffee tastes pleasent and
soft. Only with the right brewing temperature
the coffee can develop the aroma at its best.
Removable water tank
·
Only with the removable water tank combined
with the regulative float the temperaturestabili-
zation can work. If the removable water tank is
damaged or gone the appliance still works like a
conventional coffee maker.
·
The regulative float contains a magnetic switch
which indicates to the appliance that water is
filled in and the regulative float works correctly.
·
If there is no removable water tank or if the
float does not work correctly, and you still want
to switch on the appliance, keep the ON/OFF
button pressed for 3 seconds.
·
Afterwards you can brew coffee as usual.
·
Please use watermarks on the carafe to indicate
the needed amount of water. The marks on the
appliance are not correct if working without re-
movable water tank.
·
If the removable water tank is replaced at a later
date, the appliance changes back automatically
into the normal mode of operation.
Cartridge replacement indicator
·
The Cloer filtre coffee maker is equipped with a
BRITA water filtre cartridge and an indicator for
changing the water filtre cartridge (LED in drop
shape).
·
If the LED starts to flash, the water filtre cart-
ridge needs to be replaced.
·
After replacing the water filtre cartridge please
press and hold the ON/OFF button for 8 se-
conds to reset the indicator.
·
After 60 brewing cycles or 60 days a cartridge
replacement will be indicated. That guaran-
tees a regular replacement.
·
NOTE : If you unplug the appliance, the coun-
ting of brewing cycles resp. days will be inter-
rupted. After plug in again the counting will
be continued.
Cleaning
·
Please remove the removable water tank
regularly, clean it in soapy water and let it dry
thoroughly.
·
Clean the main water tank regularly with a damp
cloth and let it dry thoroughly.
·
If you do not use the coffee maker for an
extended period, keep the removable tank
cleaned and dried outside the coffee maker.
·
Clean the surface of the coffee maker with a
damp cloth.
·
Do not use abrasive cleaners.
·
Never clean your coffee maker in the dish-
washer or in rinse water.
Decalcification
·
The water filtre cartridge continuously decre-
ases the lime content of the water. Using a water
filtre cartridge therefore requires rare decalcifi-
cation of your machine.
·
First of all, remove the water filtre cartridge.
·
Pour approx. 6 cups of water and approx. 150
ml of citric acid or vinegar into the coffee maker
and switch the machine on. After decalcifying,
rinse the machine by operating it 2 times with 6
cups of clear water.
·
Now you can put in the water filtre catrdige
again.
·
NOTE: If you miss to decalcify regularly you
risque that the appliance gets louder and that
the brewing process takes longer than before!
·
No warranty claim in case of faulty function-
ing due to calcification!
BRITA® MAXTRA filter cartridge –
Function
Reliable filter performance with the unique
MAXTRA technology:
The natural MicroporeFilter in combination with
the powerful ProtectFilter reduces chlorine and
limescale for a great natural taste and perma-
nently absorbs metals such as lead and copper.
MAXTRA FlowControl ensures the perfect filtra-
tion time for best results.
Instructions for use for the BRITA®
MAXTRA filter cartridge
Step 1: Preparing the cartridge
To prepare your BRITA MAXTRA cartridge, please
remove protective wrapper (note: cartridge and
inside wrapper may appear moist, this is simply
condensation). Immerse cartridge in cold water
and shake it gently to remove any air bubbles.
NOTE: As is required for some other water fil-
ter cartridges, there is no need to pre-soak the
MAXTRA cartridge.
EN
11