Re-Record Greeting Using Remote Access - AUDIOLINE AB 818 G Bedienungsanleitung

REMOTE ACCESS
After the last message, the machine answers with several signal tones. Now, within
the next 7 seconds, you have various possibilities. If you do not make any input within
these 7 seconds, the connection will be cut off automatically and all messages will
remain saved.
Repeat all messages
Delete all messages
Switch off answering machine
After this input, the AUDIOLINE 818G is no longer ready for operation.
Save all messages
Note: If you have deleted individual messages during play-back, these
are undeleted once more if you listen to all the messages again using 2
and #.
3.4

RE-RECORD GREETING USING REMOTE ACCESS

Call your own telephone number and allow the greeting message to run through to
the end. Wait until your answering machine is ready to record a message.
After the signal tone, enter your personal authorisation code by pressing the
appropriate numbers on the number pad of the remote control or of a telephone. A
signal tone confirms that the right code has been entered.
To re-record the greeting message, press the key combination 7 and #. Dictate your
new greeting after the signal tone.
Complete the message with the keys 7 and #. The new greeting will now be
repeated automatically.
Finish the call by putting the receiver down.
30
AUDIOLINE 818G
Press 2 and #
Press 3 and #
Press 9 and #"
no input