Remote Access Facilities - AUDIOLINE AB 818 G Bedienungsanleitung

AUDIOLINE 818G
3.3

REMOTE ACCESS FACILITIES

Call your own telephone number and allow the greeting message to run through to
the end. Wait until your answering machine is ready to record a message.
After the signal tone, enter your personal authorisation code by pressing the
appropriate numbers on the number pad of the remote control or of a telephone.
A signal tone confirms that the right code has been entered. Now select one of the
functions listed below by pressing the appropriate combination of keys. The pause
between entering the individual functions must not exceed 12 seconds as, otherwise,
the connection will be cut off automatically.
Replay all recorded messages
Replay newly recorded messages
Note: While you are listening to the messages, the unit asks every 2
minutes and 40 seconds, whether you still want to carry on listening. The
answering machine stops and you will hear three signal tones. Enter the
number "2" to continue playing back the messages.
While playing back, you have the following facilities:
Skip message
Repeat message
Repeat previous message
Delete message
REMOTE ACCESS
Press "2 and #"
Press "2 and 5"
Press 7 and #
Press 8 and #
Press 6 and #
Press 3 and #
29